The Main Features
Fully sealed and fully insulated structure, no insulation distance, reliable protection of personal safety.
It can be used in both ring network and terminal, the conversion is very convenient, improve the reliability of power supply.
Small loss, according to customer needs to provide loss level for the series of combined-type transformers for selection
The cable connector can operate 200A load current and can be used as a load switch in case of emergency
Double fuse protection reduces the operation cost
The cabinet adopts anticorrosive design and special spray paint treatment, which is widely applicable to all kinds of harsh environments
The substation is divided into metal shell and non-metal shell, and the box body is high voltage chamber, transformer room and low pressure chamber, which are arranged in various ways.
Environmental conditions for product use
Ambient air temperature: not higher than +40℃, not lower than-25℃, the average temperature within 24 hours is not higher than +35℃
Altitude: not more than 2000m above sea level
Humidity: ambient air temperature shall not exceed 50% when the maximum temperature is +40℃, and the influence of accidental condensation caused by temperature change shall be considered
The vertical inclination of the equipment during installation shall not exceed 5 degrees
No fire and explosion hazard, serious pollution, chemical corrosion and violent vibration places.
The characteristic of complete equipment, beautiful appearance, safe and reliable operation, convenient maintenance and high selectivity
It has the advantages of small floor area, convenient moving load center, short construction period and less waste.